diff -Nur linux-2.6.22.1.org/arch/ppc/Kconfig linux-2.6.22.1/arch/ppc/Kconfig
--- linux-2.6.22.1.org/arch/ppc/Kconfig	2007-07-09 08:32:17.000000000 +0900
+++ linux-2.6.22.1/arch/ppc/Kconfig	2007-07-09 22:44:42.000000000 +0900
@@ -663,6 +663,9 @@
 	  Select SANDPOINT if configuring for a Motorola Sandpoint X3
 	  (any flavor).
 
+config LINKSTATION
+	bool "Buffalo-Linkstation"
+	
 config RADSTONE_PPC7D
 	bool "Radstone Technology PPC7D board"
 	select PPC_I8259
@@ -748,6 +751,19 @@
 	  platform.
 endchoice
 
+choice
+	prompt "Linkstation Type"
+	depends on LINKSTATION
+	default KUROBOXHG
+
+config  KUROBOX
+	bool "Kurobox"
+
+config  KUROBOXHG
+	bool "Kurobox HG"
+
+endchoice
+
 config PQ2ADS
 	bool
 	depends on ADS8272
@@ -821,7 +837,7 @@
 	depends on SANDPOINT || SPRUCE || PPLUS || \
 		PRPMC750 || PRPMC800 || LOPEC || \
 		(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
-		83xx
+		83xx || LINKSTATION
 	default y
 
 config FORCE
@@ -905,13 +921,13 @@
 
 config MPC10X_BRIDGE
 	bool
-	depends on POWERPMC250 || LOPEC || SANDPOINT
+	depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION
 	select PPC_INDIRECT_PCI
 	default y
 
 config MPC10X_OPENPIC
 	bool
-	depends on POWERPMC250 || LOPEC || SANDPOINT
+	depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION
 	default y
 
 config MPC10X_STORE_GATHERING
diff -Nur linux-2.6.22.1.org/arch/ppc/platforms/Makefile linux-2.6.22.1/arch/ppc/platforms/Makefile
--- linux-2.6.22.1.org/arch/ppc/platforms/Makefile	2007-07-09 08:32:17.000000000 +0900
+++ linux-2.6.22.1/arch/ppc/platforms/Makefile	2007-07-09 22:44:42.000000000 +0900
@@ -24,6 +24,7 @@
 obj-$(CONFIG_PRPMC800)		+= prpmc800.o
 obj-$(CONFIG_RADSTONE_PPC7D)	+= radstone_ppc7d.o
 obj-$(CONFIG_SANDPOINT)		+= sandpoint.o
+obj-$(CONFIG_LINKSTATION)	+= linkstation.o
 obj-$(CONFIG_SBC82xx)		+= sbc82xx.o
 obj-$(CONFIG_SPRUCE)		+= spruce.o
 obj-$(CONFIG_LITE5200)		+= lite5200.o
diff -Nur linux-2.6.22.1.org/arch/ppc/platforms/linkstation.c linux-2.6.22.1/arch/ppc/platforms/linkstation.c
--- linux-2.6.22.1.org/arch/ppc/platforms/linkstation.c	1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.22.1/arch/ppc/platforms/linkstation.c	2007-07-09 22:44:42.000000000 +0900
@@ -0,0 +1,484 @@
+/*
+ * arch/ppc/platforms/linkstation_setup.c
+ *
+ * Board setup routines for the Motorola SPS linkstation Test Platform.
+ *
+ * Author: Mark A. Greer
+ *	 mgreer@mvista.com
+ *
+ * 2000-2003 (c) MontaVista Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/initrd.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/serial.h>
+#include <linux/tty.h>	/* for linux/serial_core.h */
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/time.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/smp.h>
+#include <asm/vga.h>
+#include <asm/open_pic.h>
+#include <asm/i8259.h>
+#include <asm/todc.h>
+#include <asm/bootinfo.h>
+#include <asm/mpc10x.h>
+#include <asm/pci-bridge.h>
+#include <asm/kgdb.h>
+#include <asm/ppc_sys.h>
+
+#include "linkstation.h"
+
+static void linkstation_halt(void);
+
+
+int num_linkstation_physmap_partitions = 5;
+static struct mtd_partition linkstation_physmap_partitions[] = {
+	{
+		.name   = "mtd_firmimg",
+		.offset = 0x000000,
+		.size   = 0x300000,
+	},
+	{
+		.name   = "mtd_bootcode",
+		.offset = 0x300000,
+		.size   =  0x70000,
+	},
+	{
+		.name   = "mtd_status",
+		.offset = 0x370000,
+		.size   =  0x10000,
+	},
+	{
+		.name   = "mtd_conf",
+		.offset = 0x380000,
+		.size   =  0x80000,
+	},
+	{
+		.name   = "mtd_allflash",
+		.offset = 0x000000,
+		.size   = 0x400000,
+	},
+/*	{
+		.name   = "mtd_data",
+		.offset = 0x310000,
+		.size   =  0xf0000,
+	},*/
+};
+
+/*
+ * Define all of the IRQ senses and polarities.  Taken from the
+ * linkstation X3 User's manual.
+ */
+static u_char linkstation_openpic_initsenses[] __initdata = {
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 0: SIOINT */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 2: PCI Slot 1 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 3: PCI Slot 2 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 4: PCI Slot 3 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 5: PCI Slot 4 */
+};
+
+
+/*
+ * Motorola SPS linkstation interrupt routing.
+ */
+static inline int
+linkstation_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	static char pci_irq_table[][4] =
+	/*
+	 *	PCI IDSEL/INTPIN->INTLINE
+	 * 	   A   B   C   D
+	 */
+	{
+		{ 16, 17, 18, 19 },	/* IDSEL 11 - IRQ0 LAN Controller */
+		{ 17, 18, 19, 16 },	/* IDSEL 12 - IRQ1 IDE Controller1 */
+		{ 20, 16, 17, 18 },	/* IDSEL 13 - IRQ4 IDE Controllert2 */
+		{ 19, 19, 19, 19 },	/* IDSEL 14 - IRQ3 USB2.0 Controller */
+		{ 18, 19, 16, 17 },	/* -------- - IRQ2 FAN Controller */
+	};
+
+	const long min_idsel = 11, max_idsel = 15, irqs_per_slot = 4;
+	return PCI_IRQ_TABLE_LOOKUP;
+}
+
+static void __init
+linkstation_find_bridges(void)
+{
+	struct pci_controller	*hose;
+
+	hose = pcibios_alloc_controller();
+
+	if (!hose)
+		return;
+
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+
+	if (mpc10x_bridge_init(hose,
+			       MPC10X_MEM_MAP_B,
+			       MPC10X_MEM_MAP_B,
+			       LINKSTATION_EUMB_BASE) == 0) {
+
+		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+
+		ppc_md.pcibios_fixup = NULL;
+		ppc_md.pcibios_fixup_bus = NULL;
+		ppc_md.pci_swizzle = common_swizzle;
+		ppc_md.pci_map_irq = linkstation_map_irq;
+	}
+	else {
+		if (ppc_md.progress)
+			ppc_md.progress("Bridge init failed", 0x100);
+		printk("Host bridge init failed\n");
+	}
+
+	return;
+}
+
+static void __init
+linkstation_setup_arch(void)
+{
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	struct uart_port serial_req;
+#endif
+
+	loops_per_jiffy = 100000000 / HZ;
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start)
+		ROOT_DEV = Root_RAM0;
+	else
+#endif
+#ifdef	CONFIG_ROOT_NFS
+		ROOT_DEV = Root_NFS;
+#else
+		ROOT_DEV = Root_HDA1;
+#endif
+
+	/* Lookup PCI host bridges */
+	linkstation_find_bridges();
+
+	if (strncmp (cur_ppc_sys_spec->ppc_sys_name, "8245", 4) == 0)
+	{
+		struct plat_serial8250_port *pdata;
+
+		pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_UART0);
+		if (pdata)
+		{
+			pdata[0].uartclk = UART_CLK;
+		}
+
+		pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_UART1);
+		if (pdata)
+		{
+			pdata[0].uartclk = UART_CLK;
+		}
+	}
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	/* Setup serial port access */
+	memset(&serial_req, 0, sizeof(serial_req));
+	serial_req.uartclk = UART_CLK;
+	serial_req.iotype = SERIAL_IO_MEM;
+	serial_req.membase = (u_char *)LINKSTATION_SERIAL_1;
+	serial_req.regshift = 0;
+	gen550_init(0, &serial_req);
+	printk(KERN_INFO "gen550_init\n");
+#endif
+
+	early_serial_console_init("console=uart,mmio,0x80004600,57600n8");
+	printk(KERN_INFO "BUFFALO Network Attached Storage Series\n");
+	printk(KERN_INFO "(C) 2002-2005 BUFFALO INC.\n");
+
+	/* DINK32 12.3 and below do not correctly enable any caches.
+	 * We will do this now with good known values.  Future versions
+	 * of DINK32 are supposed to get this correct.
+	 */
+	if (cpu_has_feature(CPU_FTR_SPEC7450))
+		/* 745x is different.  We only want to pass along enable. */
+		_set_L2CR(L2CR_L2E);
+	else if (cpu_has_feature(CPU_FTR_L2CR))
+		/* All modules have 1MB of L2.  We also assume that an
+		 * L2 divisor of 3 will work.
+		 */
+		_set_L2CR(L2CR_L2E | L2CR_L2SIZ_1MB | L2CR_L2CLK_DIV3
+				| L2CR_L2RAM_PIPE | L2CR_L2OH_1_0 | L2CR_L2DF);
+#if 0
+	/* Untested right now. */
+	if (cpu_has_feature(CPU_FTR_L3CR)) {
+		/* Magic value. */
+		_set_L3CR(0x8f032000);
+	}
+#endif
+}
+
+/*
+ * Interrupt setup and service.  Interrrupts on the linkstation come
+ * from the four PCI slots plus the 8259 in the Winbond Super I/O (SIO).
+ * The 8259 is cascaded from EPIC IRQ0, IRQ1-4 map to PCI slots 1-4,
+ * IDE is on EPIC 7 and 8.
+ */
+static void __init
+linkstation_init_IRQ(void)
+{
+	OpenPIC_InitSenses = linkstation_openpic_initsenses;
+	OpenPIC_NumInitSenses = sizeof(linkstation_openpic_initsenses);
+
+	mpc10x_set_openpic();
+}
+
+static unsigned long __init
+linkstation_find_end_of_memory(void)
+{
+#if defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) || defined(CONFIG_KUROBOXHG) 
+	return 128*1024*1024;
+#elif defined(CONFIG_HLAN) || defined(CONFIG_LAN) || defined(CONFIG_KUROBOX) 
+	return 64*1024*1024;
+#else
+	#error "Linkstation type not defined"
+#endif
+}
+
+static void __init
+linkstation_map_io(void)
+{
+	io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO);
+	io_block_mapping(LINKSTATION_EUMB_BASE, LINKSTATION_EUMB_BASE, 
+				MPC10X_EUMB_SIZE, _PAGE_IO);
+}
+
+static void
+linkstation_restart(char *cmd)
+{
+	local_irq_disable();
+	for(;;)  /* Spin until reset happens */
+          out_8((void *)LINKSTATION_SERIAL_0, 0x47); // send shutdown messages
+	/* NOTREACHED */
+}
+
+static void
+linkstation_power_off(void)
+{
+	local_irq_disable();
+	for(;;)  /* Spin until power-off happens */
+	  out_8((void *)LINKSTATION_SERIAL_0, 0x47); // send shutdown messages
+	/* NOTREACHED */
+}
+
+static void
+linkstation_halt(void)
+{
+	linkstation_power_off();
+	/* NOTREACHED */
+}
+
+static int
+linkstation_show_cpuinfo(struct seq_file *m)
+{
+	seq_printf(m, "vendor\t\t: Motorola SPS\n");
+	seq_printf(m, "machine\t\t: MPC8241\n");
+	return 0;
+}
+
+void linkstation_calibrate_decr(void)
+{
+	ulong	freq;
+
+#if defined(CONFIG_KUROBOXHG)
+	freq=32522240;	/* {32.768MHz*(100% - 0.75%)} * 4 / 4 */
+#elif defined(CONFIG_KUROBOX)
+	freq=24391680;  /* {24.576MHz*(100% - 0.75%)} * 3 / 4 */
+#else
+	#error "Linkstation type not defined"
+#endif	
+	
+	tb_ticks_per_jiffy = freq / HZ;
+	tb_to_us = mulhwu_scale_factor(freq, 1000000);
+	printk("decrementer frequency = %ld.%6ld MHz \n", freq / 1000000, freq % 1000000);
+	return;
+}
+
+/*
+ * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1.
+ */
+static __inline__ void
+linkstation_set_bat(void)
+{
+	unsigned long bat3u, bat3l;
+
+	__asm__ __volatile__(
+			" lis %0,0xf800\n	\
+			ori %1,%0,0x002a\n	\
+			ori %0,%0,0x0ffe\n	\
+			mtspr 0x21e,%0\n	\
+			mtspr 0x21f,%1\n	\
+			isync\n			\
+			sync "
+			: "=r" (bat3u), "=r" (bat3l));
+}
+
+#define PARM_ADDR 0xfff70000
+
+void __init
+parse_kernelparm(void)
+{
+	unsigned char *addr;
+	unsigned char *cmdparm = cmd_line;
+	unsigned int magic = 0, i;
+	unsigned char tmp_parm[8];
+	unsigned char tmp_char = 'A';
+	const char emroot[]="root=/dev/ram0";
+
+	addr = (unsigned char *)PARM_ADDR;
+
+	for (i = 0; i < 4; i++) {
+		magic += (unsigned int)*addr << (i*8);
+		addr++;
+	}
+//	printk("magic: %08x\n", magic);
+
+	if (magic != 0x4f52554b) {      // KURO
+		if (magic == 0x474e474e) {	// NGNG
+			printk("Force EM mode. magic: %08x\n", magic);
+			strcpy(cmdparm, emroot);
+		}
+	}
+	else {
+
+		/* read kernel parameter from flash */
+	     for (i = 0; i < 8; i++) {
+ 		tmp_parm[i] = *addr++;
+	     }
+
+             if (strncmp(tmp_parm, "cmdline=", 8) == 0) {
+
+		/* read kernel parameter from flash */
+		for (i = 0; (i < 256 && tmp_char != 0x0a); i++) {
+		    tmp_char = *addr++;
+		    if (tmp_char == 0x0a ) {
+		    	 *cmdparm++ = '\0';
+	            } else {
+			 *cmdparm++ = tmp_char;
+		    }
+		}
+		printk("cmdline from FLASH=%s\n",cmd_line);
+	   }
+	}
+//	printk("---cmdline=%s\n",cmd_line);
+	return;
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		unsigned long r6, unsigned long r7)
+{
+	unsigned int i;
+
+	parse_bootinfo(find_bootinfo());
+#if 01
+	/* ASSUMPTION:  If both r3 (bd_t pointer) and r6 (cmdline pointer)
+	 * are non-zero, then we should use the board info from the bd_t
+	 * structure and the cmdline pointed to by r6 instead of the
+	 * information from birecs, if any.  Otherwise, use the information
+	 * from birecs as discovered by the preceeding call to
+	 * parse_bootinfo().  This rule should work with both PPCBoot, which
+	 * uses a bd_t board info structure, and the kernel boot wrapper,
+	 * which uses birecs.
+	 */
+	printk("\n\nKERNELBASE=%x (r6=%lx r7=%lx)",KERNELBASE,r6,r7);
+	printk(" r3=%lx (r4=%lx r5=%lx)\n",r3,r4,r5);
+
+	if (r6) {
+		/* copy command line */
+		*(char *)(r7+KERNELBASE) = 0;
+		strcpy(cmd_line, (char *)(r6+KERNELBASE));
+
+	/* change + to , for insmod problem */
+		for( i = 0; i < strlen(cmd_line); i++){
+		if( cmd_line[i] == '+' )
+		cmd_line[i] = ',';
+		}
+
+#ifdef	CONFIG_RTC_DRV_RS5C372
+		strcat(cmd_line, " rtc-rs5c372.probe=0,0x32");
+#endif
+	}
+//	printk("cmd_line=%s\n",cmd_line);
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	/* take care of initrd if we have one */
+	if (r4) {
+		initrd_start = r4 + KERNELBASE;
+		initrd_end = r5 + KERNELBASE;
+	}
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+	/* Map in board regs, etc. */
+	linkstation_set_bat();
+
+	parse_kernelparm();
+
+#ifdef CONFIG_MTD_PHYSMAP
+	physmap_set_partitions(&linkstation_physmap_partitions[0],
+			       num_linkstation_physmap_partitions);	
+#endif
+
+	isa_io_base = MPC10X_MAPB_ISA_IO_BASE;
+	isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE;
+	pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET;
+	ISA_DMA_THRESHOLD = 0x00ffffff;
+	DMA_MODE_READ = 0x44;
+	DMA_MODE_WRITE = 0x48;
+
+	ppc_md.setup_arch = linkstation_setup_arch;
+	ppc_md.show_cpuinfo = linkstation_show_cpuinfo;
+	ppc_md.init_IRQ = linkstation_init_IRQ;
+	ppc_md.get_irq = openpic_get_irq;
+
+	ppc_md.restart = linkstation_restart;
+	ppc_md.power_off = linkstation_power_off;
+	ppc_md.halt = linkstation_halt;
+
+	ppc_md.find_end_of_memory = linkstation_find_end_of_memory;
+	ppc_md.setup_io_mappings = linkstation_map_io;
+
+	ppc_md.calibrate_decr = linkstation_calibrate_decr;
+
+	ppc_md.time_init = NULL;
+	ppc_md.set_rtc_time = NULL;
+	ppc_md.get_rtc_time = NULL;
+
+	ppc_md.nvram_read_val = NULL;
+	ppc_md.nvram_write_val = NULL;
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+	ppc_md.progress = gen550_progress;
+#endif
+}
+
diff -Nur linux-2.6.22.1.org/arch/ppc/platforms/linkstation.h linux-2.6.22.1/arch/ppc/platforms/linkstation.h
--- linux-2.6.22.1.org/arch/ppc/platforms/linkstation.h	1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.22.1/arch/ppc/platforms/linkstation.h	2007-07-09 22:44:42.000000000 +0900
@@ -0,0 +1,43 @@
+/*
+ * arch/ppc/platforms/linkstation.h
+ *
+ * Definitions for Motorola SPS Sandpoint Test Platform
+ *
+ * Author: Mark A. Greer
+ *         mgreer@mvista.com
+ *
+ * 2000-2003 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * Sandpoint uses the CHRP map (Map B).
+ */
+
+#ifndef __PPC_PLATFORMS_LINKSTATION_H
+#define __PPC_PLATFORMS_LINKSTATION_H
+
+#include <asm/ppcboot.h>
+
+#define LINKSTATION_EUMB_BASE           0x80000000
+/*
+ * Serial defines.
+ */
+#define LINKSTATION_SERIAL_0		0x80004500
+#define LINKSTATION_SERIAL_1		0x80004600
+
+#define RS_TABLE_SIZE  2
+
+#if defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) || defined(CONFIG_KUROBOXHG)
+#define UART_CLK  130041000
+#elif defined(CONFIG_HLAN) || defined(CONFIG_LAN) || defined(CONFIG_KUROBOX)
+#define UART_CLK  97553800
+#else
+#error "Linkstation type not defined"
+#endif
+
+#define BASE_BAUD			( UART_CLK / 16 )
+
+#endif /* __PPC_PLATFORMS_LINKSTATION_H */
diff -Nur linux-2.6.22.1.org/arch/ppc/syslib/Makefile linux-2.6.22.1/arch/ppc/syslib/Makefile
--- linux-2.6.22.1.org/arch/ppc/syslib/Makefile	2007-07-09 08:32:17.000000000 +0900
+++ linux-2.6.22.1/arch/ppc/syslib/Makefile	2007-07-09 22:44:42.000000000 +0900
@@ -67,6 +67,7 @@
 obj-$(CONFIG_PRPMC800)		+= open_pic.o pci_auto.o
 obj-$(CONFIG_RADSTONE_PPC7D)	+= pci_auto.o
 obj-$(CONFIG_SANDPOINT)		+= pci_auto.o todc_time.o
+obj-$(CONFIG_LINKSTATION)	+= pci_auto.o
 obj-$(CONFIG_SBC82xx)		+= todc_time.o
 obj-$(CONFIG_SPRUCE)		+= cpc700_pic.o pci_auto.o \
 				   todc_time.o
diff -Nur linux-2.6.22.1.org/arch/ppc/syslib/mpc10x_common.c linux-2.6.22.1/arch/ppc/syslib/mpc10x_common.c
--- linux-2.6.22.1.org/arch/ppc/syslib/mpc10x_common.c	2007-07-09 08:32:17.000000000 +0900
+++ linux-2.6.22.1/arch/ppc/syslib/mpc10x_common.c	2007-07-09 22:44:42.000000000 +0900
@@ -121,30 +121,23 @@
 			},
 		},
 	},
-	[MPC10X_DMA1] = {
-		.name	= "fsl-dma",
-		.id	= 1,
-		.num_resources = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC10X_EUMB_DMA_OFFSET + 0x20,
-				.end	= MPC10X_EUMB_DMA_OFFSET + 0x2f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
 	[MPC10X_UART0] = {
 		.name = "serial8250",
 		.id	= PLAT8250_DEV_PLATFORM,
+#ifdef CONFIG_LINKSTATION
+		.dev.platform_data = serial_plat_uart1,
+#else
 		.dev.platform_data = serial_plat_uart0,
+#endif
 	},
 	[MPC10X_UART1] = {
 		.name = "serial8250",
 		.id	= PLAT8250_DEV_PLATFORM1,
+#ifdef CONFIG_LINKSTATION
+		.dev.platform_data = serial_plat_uart0,
+#else
 		.dev.platform_data = serial_plat_uart1,
+#endif
 	},
 
 };
@@ -235,7 +228,12 @@
 					"PCI host bridge");
 
 			pci_init_resource (&hose->mem_resources[0],
+/* hack for eumb base being at 0x80000000 */
+#ifdef CONFIG_LINKSTATION
+					0x81000000,
+#else
 					0x80000000,
+#endif
 					0xfcffffff,
 					IORESOURCE_MEM,
 					"PCI host bridge");
diff -Nur linux-2.6.22.1.org/config_kurobox linux-2.6.22.1/config_kurobox
--- linux-2.6.22.1.org/config_kurobox	1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.22.1/config_kurobox	2007-07-21 09:53:23.000000000 +0900
@@ -0,0 +1,1307 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22.1
+# Sat Jul 21 09:52:39 2007
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION="-kurobox"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Processor
+#
+CONFIG_6xx=y
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+# CONFIG_E500 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_ALTIVEC is not set
+# CONFIG_TAU is not set
+CONFIG_KEXEC=y
+# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_PPC_GEN550=y
+CONFIG_PPC_STD_MMU=y
+
+#
+# Platform options
+#
+# CONFIG_PPC_PREP is not set
+# CONFIG_APUS is not set
+# CONFIG_KATANA is not set
+# CONFIG_WILLOW is not set
+# CONFIG_CPCI690 is not set
+# CONFIG_POWERPMC250 is not set
+# CONFIG_CHESTNUT is not set
+# CONFIG_SPRUCE is not set
+# CONFIG_HDPU is not set
+# CONFIG_EV64260 is not set
+# CONFIG_LOPEC is not set
+# CONFIG_MVME5100 is not set
+# CONFIG_PPLUS is not set
+# CONFIG_PRPMC750 is not set
+# CONFIG_PRPMC800 is not set
+# CONFIG_SANDPOINT is not set
+CONFIG_LINKSTATION=y
+# CONFIG_RADSTONE_PPC7D is not set
+# CONFIG_PAL4 is not set
+# CONFIG_EST8260 is not set
+# CONFIG_SBC82xx is not set
+# CONFIG_SBS8260 is not set
+# CONFIG_RPX8260 is not set
+# CONFIG_TQM8260 is not set
+# CONFIG_ADS8272 is not set
+# CONFIG_PQ2FADS is not set
+# CONFIG_LITE5200 is not set
+# CONFIG_MPC834x_SYS is not set
+# CONFIG_EV64360 is not set
+CONFIG_KUROBOX=y
+# CONFIG_KUROBOXHG is not set
+CONFIG_MPC10X_BRIDGE=y
+CONFIG_MPC10X_OPENPIC=y
+CONFIG_MPC10X_STORE_GATHERING=y
+# CONFIG_SMP is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="root=/dev/hda1 console=uart,mmio,0x80004600,57600n8"
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xffc00000
+CONFIG_MTD_PHYSMAP_LEN=0x400000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+CONFIG_IDEPCI_PCIBUS_ORDER=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_ONLYDISK=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+CONFIG_BLK_DEV_SIIMAGE=y
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=y
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+CONFIG_RS5C372_RTC=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
diff -Nur linux-2.6.22.1.org/config_kuroboxhg linux-2.6.22.1/config_kuroboxhg
--- linux-2.6.22.1.org/config_kuroboxhg	1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.22.1/config_kuroboxhg	2007-07-21 09:49:29.000000000 +0900
@@ -0,0 +1,1286 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22.1
+# Thu Jul 19 20:51:34 2007
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION="-kuroboxHG"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Processor
+#
+CONFIG_6xx=y
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+# CONFIG_E500 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_ALTIVEC is not set
+# CONFIG_TAU is not set
+CONFIG_KEXEC=y
+# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_PPC_GEN550=y
+CONFIG_PPC_STD_MMU=y
+
+#
+# Platform options
+#
+# CONFIG_PPC_PREP is not set
+# CONFIG_APUS is not set
+# CONFIG_KATANA is not set
+# CONFIG_WILLOW is not set
+# CONFIG_CPCI690 is not set
+# CONFIG_POWERPMC250 is not set
+# CONFIG_CHESTNUT is not set
+# CONFIG_SPRUCE is not set
+# CONFIG_HDPU is not set
+# CONFIG_EV64260 is not set
+# CONFIG_LOPEC is not set
+# CONFIG_MVME5100 is not set
+# CONFIG_PPLUS is not set
+# CONFIG_PRPMC750 is not set
+# CONFIG_PRPMC800 is not set
+# CONFIG_SANDPOINT is not set
+CONFIG_LINKSTATION=y
+# CONFIG_RADSTONE_PPC7D is not set
+# CONFIG_PAL4 is not set
+# CONFIG_EST8260 is not set
+# CONFIG_SBC82xx is not set
+# CONFIG_SBS8260 is not set
+# CONFIG_RPX8260 is not set
+# CONFIG_TQM8260 is not set
+# CONFIG_ADS8272 is not set
+# CONFIG_PQ2FADS is not set
+# CONFIG_LITE5200 is not set
+# CONFIG_MPC834x_SYS is not set
+# CONFIG_EV64360 is not set
+# CONFIG_KUROBOX is not set
+CONFIG_KUROBOXHG=y
+CONFIG_MPC10X_BRIDGE=y
+CONFIG_MPC10X_OPENPIC=y
+CONFIG_MPC10X_STORE_GATHERING=y
+# CONFIG_SMP is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="root=/dev/hda1 console=uart,mmio,0x80004600,57600n8"
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xffc00000
+CONFIG_MTD_PHYSMAP_LEN=0x400000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+CONFIG_IDEPCI_PCIBUS_ORDER=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_ONLYDISK=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+CONFIG_BLK_DEV_SIIMAGE=y
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+CONFIG_RS5C372_RTC=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
diff -Nur linux-2.6.22.1.org/drivers/char/Kconfig linux-2.6.22.1/drivers/char/Kconfig
--- linux-2.6.22.1.org/drivers/char/Kconfig	2007-07-09 08:32:17.000000000 +0900
+++ linux-2.6.22.1/drivers/char/Kconfig	2007-07-09 22:44:42.000000000 +0900
@@ -813,6 +813,12 @@
 	  via the file /proc/rtc and its behaviour is set by various ioctls on
 	  /dev/rtc.
 
+config RS5C372_RTC
+	bool "Ricoh 5C372 RTC support"
+	depends on I2C
+	help
+	 If you say Y here you get support for the Ricoh 5C372 RTC
+
 config GEN_RTC
 	tristate "Generic /dev/rtc emulation"
 	depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV && !S390 && !SUPERH
diff -Nur linux-2.6.22.1.org/drivers/char/Makefile linux-2.6.22.1/drivers/char/Makefile
--- linux-2.6.22.1.org/drivers/char/Makefile	2007-07-09 08:32:17.000000000 +0900
+++ linux-2.6.22.1/drivers/char/Makefile	2007-07-09 22:44:42.000000000 +0900
@@ -72,6 +72,7 @@
 obj-$(CONFIG_EFI_RTC)		+= efirtc.o
 obj-$(CONFIG_SGI_DS1286)	+= ds1286.o
 obj-$(CONFIG_SGI_IP27_RTC)	+= ip27-rtc.o
+obj-$(CONFIG_RS5C372_RTC)	+= rs5c372-rtc.o
 obj-$(CONFIG_DS1302)		+= ds1302.o
 ifeq ($(CONFIG_GENERIC_NVRAM),y)
   obj-$(CONFIG_NVRAM)	+= generic_nvram.o
diff -Nur linux-2.6.22.1.org/drivers/char/rs5c372-rtc.c linux-2.6.22.1/drivers/char/rs5c372-rtc.c
--- linux-2.6.22.1.org/drivers/char/rs5c372-rtc.c	1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.22.1/drivers/char/rs5c372-rtc.c	2007-07-09 22:44:42.000000000 +0900
@@ -0,0 +1,482 @@
+/*
+ * rs5c372.c
+ *
+ * Device driver for Real Time Controller's rs5c372 chips
+ *
+ * Copyright (C) 2005 Pavel Mironchik pmironchik@optifacio.net
+ *	
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver is adapted from the m41st85w driver
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+
+#include <linux/kernel.h>
+#include <linux/poll.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/rtc.h>
+#include <linux/string.h>
+#include <linux/miscdevice.h>
+#include <linux/time.h>
+#include <asm/machdep.h>
+#include <asm/uaccess.h>
+#include <asm/time.h>
+
+#define RS5C372_DEBUG 0
+
+#define RS5C372_I2C_SLAVE_ADDR  0x32
+#define RS5C372_RAM_ADDR_START	0x00
+#define RS5C372_RAM_ADDR_END	0x0F
+#define RS5C372_RAM_SIZE 	0x10
+#define I2C_DRIVERID_RS5C372    0xF6
+
+#define RS5C372_GETDATETIME	0
+#define RS5C372_SETTIME		1
+#define RS5C372_SETDATETIME	2
+
+#define RTC_SECONDS	0
+#define RTC_MINUTES	1
+#define RTC_HOURS	2
+#define RTC_WEEKDAYS	3
+#define RTC_DAYS	4
+#define RTC_MONTHS	5
+#define RTC_YEARS	6
+#define RTC_TIMETRIMM	7
+
+// ALARM A registers
+#define RTC_AM		8
+#define RTC_AH		9
+#define RTC_AW		10
+
+// ALARM B registers
+#define RTC_BM		11
+#define RTC_BH		12
+#define RTC_BW		13
+
+// Control registers
+#define RTC_CR1		14
+#define RTC_CR2		15
+
+
+#define BCD_TO_BIN(val) (((val)&15) + ((val)>>4)*10)
+#define BIN_TO_BCD(val) ((((val)/10)<<4) + (val)%10)
+#define HOURS_24(n)		BCD_TO_BIN((n)&0x3F)
+
+extern void to_tm(int tim, struct rtc_time * tm);
+
+struct i2c_driver rs5c372_driver;
+struct i2c_client *rs5c372_i2c_client = NULL;
+
+static int rs5c372_rtc_ioctl(struct inode *, struct file *, unsigned int,
+			      unsigned long);
+static int rs5c372_rtc_open(struct inode *inode, struct file *file);
+static int rs5c372_rtc_release(struct inode *inode, struct file *file);
+/*RTC related staff*/
+static unsigned long rs5c372_get_rtc_time(void);
+#ifndef CONFIG_LINKSTATION
+static int rs5c372_set_rtc_time(unsigned long);
+#endif
+
+static struct file_operations rtc_fops = {
+      owner:THIS_MODULE,
+      llseek:no_llseek,
+      ioctl:rs5c372_rtc_ioctl,
+      open:rs5c372_rtc_open,
+      release:rs5c372_rtc_release,
+};
+
+
+static struct miscdevice rs5c372_dev = {
+	RTC_MINOR,
+	"rtc",
+	&rtc_fops
+};
+
+static int rs5c372_attach_adapter(struct i2c_adapter *adap);
+static int rs5c372_detach(struct i2c_client *client);
+static int rs5c372_command(struct i2c_client *client, unsigned int cmd,
+			    void *arg);
+struct i2c_driver rs5c372_driver = {
+//      name:"rs5c372",
+      id:I2C_DRIVERID_RS5C372,
+//      flags:I2C_DF_NOTIFY,
+      attach_adapter:rs5c372_attach_adapter,
+      detach_client:rs5c372_detach,
+      command:rs5c372_command
+};
+
+extern struct machdep_calls ppc_md;
+
+
+/*Pointers to get/set time via rs5c372 chip to substitute undefined (yet)
+ fields in struct ppc_md. we'll save current pointers concerning RTC from 
+ ppc_md and will restore them in cleanup_module
+ */
+static int             (*old_set_rtc_time)(unsigned long nowtime);
+static unsigned long   (*old_get_rtc_time)(void);
+
+extern spinlock_t rtc_lock;
+static spinlock_t rs5c372_rtc_lock = SPIN_LOCK_UNLOCKED;
+
+static int rs5c372_read(char *buf, int len)
+{
+	unsigned long flags;
+	struct i2c_msg msgs[1] = {
+		{rs5c372_i2c_client->addr, I2C_M_RD, len, buf}
+	};
+	int ret;
+
+	spin_lock_irqsave(&rs5c372_rtc_lock, flags);
+	ret = i2c_transfer(rs5c372_i2c_client->adapter, msgs, 1);
+	spin_unlock_irqrestore(&rs5c372_rtc_lock, flags);
+	return ret;
+}
+
+static int rs5c372_write(char *buf, int len)
+{
+	// warning refer of the format of the first byte
+	// in rs5c372a-e datasheet
+	
+	unsigned long flags;
+	struct i2c_msg msgs[1] = {
+		{rs5c372_i2c_client->addr, 0, len, buf}
+	};
+	int ret;
+
+	spin_lock_irqsave(&rs5c372_rtc_lock, flags);
+	ret = i2c_transfer(rs5c372_i2c_client->adapter, msgs, 1);
+	spin_unlock_irqrestore(&rs5c372_rtc_lock, flags);
+	return ret;
+}
+
+static int rs5c372_attach(struct i2c_adapter *adap, int addr, unsigned short flags, int kind)
+{
+        unsigned char buf[2];
+        struct i2c_msg msgs[1] = {
+                  {addr, 0, 2, buf}
+        };
+	int rc = 0;
+	struct i2c_client *client;
+	unsigned long sec;
+
+	client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (!client)
+		return -ENOMEM;
+
+//	strlcpy(client->name, "RS5C372", I2C_NAME_SIZE);
+	
+//	client->flags	= I2C_CLIENT_ALLOW_USE | I2C_DF_NOTIFY;
+	client->addr	= addr;
+	client->adapter	= adap;
+	client->driver	= &rs5c372_driver;
+
+	if ((rc = i2c_attach_client(client)) != 0) {
+		printk(KERN_ERR "rs5c372: Attach was not ok!\n");
+		kfree(client);
+		return rc;
+	}	
+	rs5c372_i2c_client = client;
+                
+	/* set 24h time */
+	buf[0] = 0xf0;
+        buf[1] = 0x20;      
+	i2c_transfer(adap, msgs, 1);
+	/* accuracy correction */
+	buf[0] = 0x70;
+#if defined(CONFIG_HTGL)
+	buf[1] = 0x77;	// -9
+#else
+	buf[1] = 0x15;
+#endif	
+        i2c_transfer(adap, msgs, 1);
+
+	sec = rs5c372_get_rtc_time();	
+	if (sec > 0)
+	{
+	    xtime.tv_sec = sec;
+       	    xtime.tv_nsec = 0;
+	    /* No update now, we just read the time from the RTC ! */
+	    last_rtc_update = xtime.tv_sec;
+            set_normalized_timespec(&wall_to_monotonic,
+	                   -xtime.tv_sec, -xtime.tv_nsec);
+/* 
+	    old_get_rtc_time=ppc_md.get_rtc_time;
+            old_set_rtc_time=ppc_md.set_rtc_time;
+
+            ppc_md.get_rtc_time=rs5c372_get_rtc_time;
+            ppc_md.set_rtc_time=rs5c372_set_rtc_time;
+*/
+
+	}
+	return 0;
+}
+
+static int rs5c372_attach_adapter(struct i2c_adapter *adap)
+{
+	return rs5c372_attach(adap, RS5C372_I2C_SLAVE_ADDR, 0, 0);
+}
+
+static int rs5c372_detach(struct i2c_client *client)
+{
+	if (client) {
+	        /*restore old handlers */
+        	ppc_md.get_rtc_time=old_get_rtc_time;
+	        ppc_md.set_rtc_time=old_set_rtc_time;
+		i2c_detach_client(client);
+		kfree(client);
+		client = rs5c372_i2c_client = NULL;
+	}
+	return 0;
+}
+
+
+static void rs5c372_convert_to_time(struct rtc_time *dt, char *buf)
+{
+	dt->tm_sec = BCD_TO_BIN(buf[1] & 0x7f);
+	dt->tm_min = BCD_TO_BIN(buf[2] & 0x7f);
+
+	/* 24 hour mode only */
+	dt->tm_hour = HOURS_24(buf[3]);
+
+	dt->tm_wday = BCD_TO_BIN(buf[4] & 0x07);
+	dt->tm_mday = BCD_TO_BIN(buf[5] & 0x3f);
+	
+	/* dt->tm_mon is zero-based */
+	dt->tm_mon = BCD_TO_BIN(buf[6] & 0x1f) - 1;
+	/* year is 1900  dt->tm_year */
+	dt->tm_year = BCD_TO_BIN(buf[7]);
+
+	if (dt->tm_year < 70) {
+		dt->tm_year += 100;
+	}
+
+#if RS5C372_DEBUG
+	printk("rs5c372_get_datetime: year = %d\n", dt->tm_year);
+	printk("rs5c372_get_datetime: mon  = %d\n", dt->tm_mon);
+	printk("rs5c372_get_datetime: mday = %d\n", dt->tm_mday);
+	printk("rs5c372_get_datetime: hour = %d\n", dt->tm_hour);
+	printk("rs5c372_get_datetime: min  = %d\n", dt->tm_min);
+	printk("rs5c372_get_datetime: sec  = %d\n", dt->tm_sec);
+#endif	
+}
+
+static int rs5c372_get_datetime(struct i2c_client *client, struct rtc_time *dt)
+{
+	unsigned char buf[8];
+	int ret = -EIO;
+
+	ret = rs5c372_read(buf,8);
+	if (ret >= 0) {
+		rs5c372_convert_to_time(dt, buf);
+		ret = 0;
+	} else
+		printk("rs5c372_get_datetime(), i2c_transfer() returned %d\n",
+		       ret);
+	return ret;
+}
+
+
+static int rs5c372_set_datetime(struct i2c_client *client, struct rtc_time *dt,int datetoo)
+{
+	unsigned char buf[7];
+	int ret, len = 4;
+	
+#if RS5C372_DEBUG	
+	printk("rs5c372_set_datetime: tm_year = %d\n", dt->tm_year);
+	printk("rs5c372_set_datetime: tm_mon  = %d\n", dt->tm_mon);
+	printk("rs5c372_set_datetime: tm_mday = %d\n", dt->tm_mday);
+	printk("rs5c372_set_datetime: tm_hour = %d\n", dt->tm_hour);
+	printk("rs5c372_set_datetime: tm_min  = %d\n", dt->tm_min);
+	printk("rs5c372_set_datetime: tm_sec  = %d\n", dt->tm_sec);
+#endif		
+
+	buf[0] = 0;
+	buf[1] = (BIN_TO_BCD(dt->tm_sec));
+	buf[2] = (BIN_TO_BCD(dt->tm_min));
+	buf[3] = (BIN_TO_BCD(dt->tm_hour));
+
+	if (datetoo) {
+		len = 8;
+		buf[4] = (BIN_TO_BCD(dt->tm_wday));
+		buf[5] = (BIN_TO_BCD(dt->tm_mday));
+		buf[6] = (BIN_TO_BCD(dt->tm_mon + 1)); 
+		buf[7] = (BIN_TO_BCD(dt->tm_year % 100));
+	}
+
+	ret = rs5c372_write(buf,len);	
+	if (ret >= 0)
+		ret = 0;
+	else
+		printk
+		    ("rs5c372_set_datetime(), i2c_master_send() returned %d\n",
+		     ret);
+	return ret;
+}
+
+static int rs5c372_command(struct i2c_client *client, unsigned int cmd, void *arg)
+{
+	if (!client)
+ 	    return -EIO;
+
+	switch (cmd) {
+	case RS5C372_GETDATETIME:
+		return rs5c372_get_datetime(client, arg);
+	case RS5C372_SETTIME:
+		return rs5c372_set_datetime(client, arg, 0);
+	case RS5C372_SETDATETIME:
+		return rs5c372_set_datetime(client, arg, 1);
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int rs5c372_rtc_open(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+
+static int rs5c372_rtc_release(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+static int rs5c372_rtc_ioctl(struct inode *inode, struct file *file,
+		   unsigned int cmd, unsigned long arg)
+{
+	unsigned long flags;
+	struct rtc_time wtime;
+	int status = 0;
+	if(!rs5c372_i2c_client)
+	{
+		printk("No client!!\n");
+		return -EIO;
+	}
+
+	switch (cmd) {
+	default:
+	case RTC_UIE_ON:
+	case RTC_UIE_OFF:
+	case RTC_PIE_ON:
+	case RTC_PIE_OFF:
+	case RTC_AIE_ON:
+	case RTC_AIE_OFF:
+	case RTC_ALM_SET:
+	case RTC_ALM_READ:
+	case RTC_IRQP_READ:
+	case RTC_IRQP_SET:
+	case RTC_EPOCH_SET:
+	case RTC_EPOCH_READ:
+	case RTC_WKALM_SET:
+	case RTC_WKALM_RD:
+		status = -EINVAL;
+		break;
+	case RTC_RD_TIME:
+		spin_lock_irqsave(&rs5c372_rtc_lock, flags);
+		rs5c372_command(rs5c372_i2c_client, RS5C372_GETDATETIME,
+				 &wtime);
+		spin_unlock_irqrestore(&rs5c372_rtc_lock, flags);
+		if (copy_to_user((void *)arg, &wtime, sizeof(struct rtc_time)))
+			status = -EFAULT;
+		break;
+
+	case RTC_SET_TIME:
+		if (!capable(CAP_SYS_TIME)) {
+			status = -EACCES;
+			break;
+		}
+
+		if (copy_from_user
+		    (&wtime, (struct rtc_time *)arg, sizeof(struct rtc_time))) {
+			status = -EFAULT;
+			break;
+		}
+
+		spin_lock_irqsave(&rs5c372_rtc_lock, flags);
+		rs5c372_command(rs5c372_i2c_client, RS5C372_SETDATETIME,
+				 &wtime);
+ 		spin_unlock_irqrestore(&rs5c372_rtc_lock, flags);
+		break;
+	}
+
+	return status;
+}
+
+/*
+ * Read the current RTC time and date
+ */
+static unsigned long rs5c372_get_rtc_time(void)
+{
+	int ret;
+	struct rtc_time tm;
+	if(!rs5c372_i2c_client)
+	{
+		printk("No client!!\n");
+		return -EIO;
+	}
+	spin_lock(&rtc_lock);
+	ret=rs5c372_command(rs5c372_i2c_client,RS5C372_GETDATETIME,&tm);
+	spin_unlock(&rtc_lock);
+	if(ret)
+	{
+            printk("%s:Command returned %d\n",__FUNCTION__,ret);
+		return ret;/*Something wrong */
+	}
+        tm.tm_year += 1900;
+	tm.tm_mon += 1;
+	return mktime(tm.tm_year,tm.tm_mon,tm.tm_mday,
+		      tm.tm_hour,tm.tm_min,tm.tm_sec);
+}
+/*
+ * Set the current RTC time and date
+ */
+#if 0
+static int rs5c372_set_rtc_time(unsigned long now)
+{
+	struct rtc_time tm;
+	int ret;
+	spin_lock(&rtc_lock);
+	to_tm(now,&tm);
+        /* convert from rtc_time to struct tm conventions */
+        tm.tm_year -= 1900;
+        tm.tm_mon -= 1;
+        ret = rs5c372_command(rs5c372_i2c_client,RS5C372_SETDATETIME,&tm);
+	spin_unlock(&rtc_lock);
+	return ret;
+}
+#endif
+
+static int __init rs5c372_init(void)
+{
+	int retval = 0;
+	retval = i2c_add_driver(&rs5c372_driver);
+	if (retval == 0) {
+		misc_register(&rs5c372_dev);
+		printk("I2C: rs5c372 RTC driver successfully loaded\n");
+	}
+	else {
+	   printk("I2C: rs5c372 RTC driver failed loading\n");	
+	}
+	return retval;
+}
+
+static void __exit rs5c372_exit(void)
+{
+	misc_deregister(&rs5c372_dev);
+	i2c_del_driver(&rs5c372_driver);
+}
+
+module_init(rs5c372_init);
+module_exit(rs5c372_exit);
+
+
+MODULE_AUTHOR("Pavel Mironchik pmironchik@optifacio.net");
+MODULE_LICENSE("GPL");
diff -Nur linux-2.6.22.1.org/drivers/ide/pci/siimage.c linux-2.6.22.1/drivers/ide/pci/siimage.c
--- linux-2.6.22.1.org/drivers/ide/pci/siimage.c	2007-07-09 08:32:17.000000000 +0900
+++ linux-2.6.22.1/drivers/ide/pci/siimage.c	2007-07-09 22:44:42.000000000 +0900
@@ -623,6 +623,7 @@
  *	mapped so we have to be sure we can fall back to I/O.
  */
  
+#ifndef CONFIG_LINKSTATION 
 static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
 {
 	unsigned long bar5	= pci_resource_start(dev, 5);
@@ -712,6 +713,7 @@
 	proc_reports_siimage(dev, (tmpbyte>>4), name);
 	return 1;
 }
+#endif
 
 /**
  *	init_chipset_siimage	-	set up an SI device
@@ -726,18 +728,24 @@
 {
 	u32 class_rev	= 0;
 	u8 tmpbyte	= 0;
+#ifndef CONFIG_LINKSTATION
 	u8 BA5_EN	= 0;
+#endif
 
         pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
         class_rev &= 0xff;
 	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (class_rev) ? 1 : 255);	
 
+#ifndef CONFIG_LINKSTATION
 	pci_read_config_byte(dev, 0x8A, &BA5_EN);
 	if ((BA5_EN & 0x01) || (pci_resource_start(dev, 5))) {
 		if (setup_mmio_siimage(dev, name)) {
 			return 0;
 		}
 	}
+#else
+	printk(KERN_WARNING "siimage: IDE controller MMIO ports not available.\n");
+#endif
 
 	pci_write_config_byte(dev, 0x80, 0x00);
 	pci_write_config_byte(dev, 0x84, 0x00);
diff -Nur linux-2.6.22.1.org/drivers/net/r8169.c linux-2.6.22.1/drivers/net/r8169.c
--- linux-2.6.22.1.org/drivers/net/r8169.c	2007-07-09 08:32:17.000000000 +0900
+++ linux-2.6.22.1/drivers/net/r8169.c	2007-07-09 22:44:42.000000000 +0900
@@ -578,6 +578,30 @@
 	mdio_write(ioaddr, MII_BMCR, val & 0xffff);
 }
 
+#ifdef CONFIG_LINKSTATION
+static void rtl8169_set_leds(struct net_device *dev)
+{
+	int option;
+	struct rtl8169_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	option = RTL_R8(PHYstatus);
+	if( option & _1000bpsF ){
+		printk(KERN_INFO "%s: 1000Mbps Full-duplex operation.\n", dev->name);
+		out_8((void *)0x80004500, 0x5d);
+		out_8((void *)0x80004500, 0x5d);
+		out_8((void *)0x80004500, 0x5d);
+		out_8((void *)0x80004500, 0x5d);
+	} else if( option & _100bps ) {
+		printk(KERN_INFO "%s: %sMbps %s-duplex operation.\n", dev->name,
+			(option & _100bps) ? "100" : "10", (option & FullDup) ? "Full" : "Half" );
+		out_8((void *)0x80004500, 0x5c);
+		out_8((void *)0x80004500, 0x5c);
+		out_8((void *)0x80004500, 0x5c);
+		out_8((void *)0x80004500, 0x5c);
+	}
+}
+#endif
+
 static void rtl8169_check_link_status(struct net_device *dev,
 				      struct rtl8169_private *tp, void __iomem *ioaddr)
 {
@@ -588,6 +612,9 @@
 		netif_carrier_on(dev);
 		if (netif_msg_ifup(tp))
 			printk(KERN_INFO PFX "%s: link up\n", dev->name);
+#ifdef CONFIG_LINKSTATION
+		rtl8169_set_leds(dev);
+#endif
 	} else {
 		if (netif_msg_ifdown(tp))
 			printk(KERN_INFO PFX "%s: link down\n", dev->name);
@@ -815,6 +842,10 @@
 	if (netif_running(dev) && (tp->phy_1000_ctrl_reg & ADVERTISE_1000FULL))
 		mod_timer(&tp->timer, jiffies + RTL8169_PHY_TIMEOUT);
 
+#ifdef CONFIG_LINKSTATION
+	rtl8169_set_leds(dev);
+#endif
+
 	return ret;
 }
 
@@ -1508,8 +1539,12 @@
 	if (rc < 0)
 		goto err_out_disable_2;
 
+#ifndef CONFIG_LINKSTATION
 	/* save power state before pci_enable_device overwrites it */
 	pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
+#else
+	pm_cap = 0;
+#endif
 	if (pm_cap) {
 		u16 pwr_command, acpi_idle_state;
 
diff -Nur linux-2.6.22.1.org/drivers/net/tulip/tulip.h linux-2.6.22.1/drivers/net/tulip/tulip.h
--- linux-2.6.22.1.org/drivers/net/tulip/tulip.h	2007-07-09 08:32:17.000000000 +0900
+++ linux-2.6.22.1/drivers/net/tulip/tulip.h	2007-07-09 22:47:44.000000000 +0900
@@ -482,12 +482,14 @@
 		while (--i && (ioread32(ioaddr + CSR5) & (CSR5_TS|CSR5_RS)))
 			udelay(10);
 
+/*
 		if (!i)
 			printk(KERN_DEBUG "%s: tulip_stop_rxtx() failed"
 					" (CSR5 0x%x CSR6 0x%x)\n",
 					pci_name(tp->pdev),
 					ioread32(ioaddr + CSR5),
 					ioread32(ioaddr + CSR6));
+*/
 	}
 }
 
diff -Nur linux-2.6.22.1.org/include/asm-ppc/serial.h linux-2.6.22.1/include/asm-ppc/serial.h
--- linux-2.6.22.1.org/include/asm-ppc/serial.h	2007-07-09 08:32:17.000000000 +0900
+++ linux-2.6.22.1/include/asm-ppc/serial.h	2007-07-09 22:44:42.000000000 +0900
@@ -25,6 +25,8 @@
 #include <platforms/prpmc800.h>
 #elif defined(CONFIG_SANDPOINT)
 #include <platforms/sandpoint.h>
+#elif defined(CONFIG_LINKSTATION)
+#include <platforms/linkstation.h>
 #elif defined(CONFIG_SPRUCE)
 #include <platforms/spruce.h>
 #elif defined(CONFIG_4xx)
diff -Nur linux-2.6.22.1.org/include/linux/i2c-id.h linux-2.6.22.1/include/linux/i2c-id.h
--- linux-2.6.22.1.org/include/linux/i2c-id.h	2007-07-09 08:32:17.000000000 +0900
+++ linux-2.6.22.1/include/linux/i2c-id.h	2007-07-09 22:44:42.000000000 +0900
@@ -110,7 +110,9 @@
 #define I2C_DRIVERID_DS1672	81	/* Dallas/Maxim DS1672 RTC	*/
 #define I2C_DRIVERID_X1205	82	/* Xicor/Intersil X1205 RTC	*/
 #define I2C_DRIVERID_PCF8563	83	/* Philips PCF8563 RTC		*/
+#ifndef CONFIG_RS5C372_RTC
 #define I2C_DRIVERID_RS5C372	84	/* Ricoh RS5C372 RTC		*/
+#endif
 #define I2C_DRIVERID_BT866	85	/* Conexant bt866 video encoder */
 #define I2C_DRIVERID_KS0127	86	/* Samsung ks0127 video decoder */
 #define I2C_DRIVERID_TLV320AIC23B 87	/* TI TLV320AIC23B audio codec  */
