Rebooting... Restarting system. . flag address=fff70100:ffffffff call set_image(ffc00000, 0) ******* Product Information ******* ---------------------------------- Product Name: KURO-BOX/HG(IESHIGE) VER: 1.00 Date: 2004/10/19 17:18:54 ---------------------------------- Firmware check: OK. zimage_start=FFC0006C, zimage_size=00117078 Linux/PPC load: root=/dev/hda1 Uncompressing Linux...done. Now booting the kernel KERNELBASE=c0000000 r6=900030 r7=90003e initrdBASE=c0000000 r4=914000 r5=a77476 cmd_line=root=/dev/hda1 magic: 82410000 ---cmdline=root=/dev/hda1 Linux version 2.6.15.4-kuroboxHG (hiroyuki@kuro-hg) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #3 Thu Mar 16 22:21:24 JST 2006 Early serial console at MMIO 0x80004600 (options '57600n8') BUFFALO Network Attached Storage Series (C) 2002-2005 BUFFALO INC. Built 1 zonelists Kernel command line: root=/dev/hda1 OpenPIC Version 1.2 (1 CPUs and 11 IRQ sources) at 80040000 PID hash table entries: 1024 (order: 10, 16384 bytes) decrementer frequency = 32.522240 MHz Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 125752k available (1732k kernel code, 660k data, 104k init, 0k highmem) Mount-cache hash table entries: 512 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 1421k freed NET: Registered protocol family 16 PCI: Probing PCI hardware PCI: Cannot allocate resource region 1 of device 0000:00:00.0 usbcore: registered new driver usbfs usbcore: registered new driver hub io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered I2C: rs5c372 RTC driver successfully loaded Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x80004600 (irq = 26) is a 16550A serial8250.1: ttyS1 at MMIO 0x80004500 (irq = 25) is a 16550A RAMDISK driver initialized: 2 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) r8169 Gigabit Ethernet driver 2.2LK loaded eth0: RTL8169 at 0xc9000f00, 00:07:40:ce:a9:47, IRQ 16 eth0: 100Mbps Half-duplex operation. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SiI680: IDE controller at PCI slot 0000:00:0c.0 SiI680: chipset revision 2 siimage: IDE controller MMIO ports not available. SiI680: BASE CLOCK == 100 SiI680: 100% native mode on irq 17 ide0: BM-DMA at 0xbffed0-0xbffed7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xbffed8-0xbffedf, BIOS settings: hdc:pio, hdd:pio hda: HDS722516VLAT20, ATA DISK drive ide0 at 0xbffef8-0xbffeff,0xbffef6 on irq 17 hda: max request size: 64KiB hda: 321672960 sectors (164696 MB) w/1794KiB Cache, CHS=20023/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 physmap flash device: 400000 at ffc00000 phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank Amd/Fujitsu Extended Query Table at 0x0040 phys_mapped_flash: Swapping erase regions for broken CFI table. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. cmdlinepart partition parsing not available RedBoot partition parsing not available Using physmap partition definition Creating 6 MTD partitions on "phys_mapped_flash": 0x00000000-0x00300000 : "mtd_firmimg" 0x00300000-0x00370000 : "mtd_bootcode" 0x00370000-0x00380000 : "mtd_status" 0x00380000-0x00400000 : "mtd_conf" 0x00000000-0x00400000 : "mtd_allflash" 0x00310000-0x00400000 : "mtd_data" usbmon: debugfs is not available ehci_hcd 0000:00:0e.2: EHCI Host Controller ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0e.2: irq 19, io mem 0xbfffcf00 ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ohci_hcd 0000:00:0e.0: OHCI Host Controller ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0e.0: irq 19, io mem 0xbfffe000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd 0000:00:0e.1: OHCI Host Controller ohci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:0e.1: irq 19, io mem 0xbfffd000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected mice: PS/2 mouse device common for all mice i2c /dev entries driver NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Adding console on ttyS0 at MMIO 0x80004600 (options '57600n8') RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). linuxrc:choose operation (timeout 4[s]) 1:shell 2:RamRoot other:HddRoot ? 2 -RamdiskRoot- Checking Switch Press... Freeing unused kernel memory: 104k init INIT: version 2.78 booting mount: /proc/filesystems: No such file or directory mount: /proc/filesystems: No such file or directory [: 0: unknown operand Mounting local filesystems... mount: Mounting /dev/root on / failed: No such file or directory Cleaning: /tmp . Configuration network interface: lo eth0 run-parts: No such file or directory run-parts: No such file or directory run-parts: No such file or directory run-parts: No such file or directory awk: No such file or directory r8169: eth0: link up eth0: 100Mbps Full-duplex operation. test: No such file or directory INIT: Entering runlevel: 2 Starting internet superserver: inetd. test: No such file or directory Kuroutoshikou KURO-BOX/HG (IESHIGE) KURO-BOX-EM login: root Password: PAM_unix[840]: (login) session opened for user root by LOGIN(uid=0) login[840]: ROOT LOGIN on `console' BusyBox v0.60.5 (2003.07.30-12:03+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. # route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.11.0 * 255.255.255.0 U 0 0 0 eth0 # route add -net 0.0.0.0 gw 192.168.11.1 # route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.11.0 * 255.255.255.0 U 0 0 0 eth0 default 192.168.11.1 0.0.0.0 UG 0 0 0 eth0 # ifconfig eth0 Link encap:Ethernet HWaddr 00:07:40:CE:A9:47 inet addr:192.168.11.150 Bcast:192.168.11.255 Mask:255.255.255.0 UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:177 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:58726 (57.3 Kb) TX bytes:0 (0.0 b) Interrupt:16 Base address:0xf00 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) #